|
MODULO with end-stirrup:
- Max. Length up to 12m.
- Economical platform configuration
- Easy to assemble one piece end-stirrup
- Can be fitted with either the Astro and PC400 hoist.
MODULO with walk-through stirrup (WTS) (Astro hoist
only):
The Power Climber walk-through stirrup is placed at the rear side of
the platform. This gives a working surface that is completely clear and
allows the corners of the building to be easily accessed
- Max. Length up to 16 m, (max. 12m between suspension points)
- Cantilever of up to 3m
The MODULO WTS is a brand new revolutionary design: It has many
unique features:
- It is the only WTS on the market that meets ALL of European Standard
EN1808 requirements, including allowing the slack rope safety device
of the hoists to act as a self-sufficient mechanical tilt limiting safety
device. This is because the top position of Astro hoist allows direct
operation of all of the hoist's built-in safety devices.
- Top limit switch activated without any additional mechanism or remote
switch required
- Telescopic vertical adjustment to allow the operator to reach as high
as possible up the building
- Very Light weight (fully assembled = 25kg) aluminium construction
- No diverter roller (pulley) at the top to reeve through
- Components are small enough to fit in a standard passenger lift (largest
part is max. 2m high, weight 15kg)
- Fits anywhere along the length of platform
- Very easy to assemble by one person with Safefix pins. No bolts (except
to fitting hoist) required for assembly or for fixing of WTS to the
main platform
Manufacturing Quality:
The MODULO platforms is made from specially extruded high-grade aluminium
profiles. The steel end-stirrups and U-frames are hot dip galvanized steel
for long lasting corrosion protection. Most screws are stainless steel.
MODULO
with end stirrup
Assembly
of MODULO
MODULO
with walk-trough stirrup
Optional MODULO Configurations:
Adjustable Angle section:
Adjusted to form a number of different angles to allow the Modulo platform
to be configured at different angles, offering a high degree of flexibility.
The unique design of the Power Climber angle section has a built-in Astro
stirrup replacing the walk-trough stirrup. This gives the platform the
best stability available.
- High number of possible positions: 20°, 30°, 45°, 60°,
72° and 90°
- Easily adjusted without any tools (Safefix pins)
- Manufactured from durable galvanized steel
- Integrated part of the Modulo system
Modulo 450®, 'Boiler stage' type platform:
Many industrial structures can only get into via narrow manholes such
as: power station boilers, aluminium calcinators, ships ballast tanks
etc.
Power Climber's Modulo 450 platform is designed to fit through a Ø450mm
manhole and provide access inside the structure.
Double-deck platforms:
This special platform configuration allows workers to work
simultaneously on two levels. The two platforms are linked at the ends
with ladder frames. The upper deck platform is fitted with a trap door
for easy access from one level to the other. Standard separation between
the platforms is 2 or 3m.
Custom designed platforms
Power Climber engineers are experts in custom designing special size
(and shape) suspended platforms to suit your particular application. See
Special platforms.
|